After a lump of clay has been centered and
the base formed, the next step in the process is pulling up the walls of the
pot and doing that is the topic of this tutorial in which I'll discuss how to
pull up the walls alongside showing you any tips and tricks I have together
with showing you what to avoid to hopefully get your throwing to a point where
you can quickly, evenly, and confidently pull the walls up on the pots you're
making. It’s worth noting that this tutorial won't go over centering or opening
up and forming the base of your lump of clay as I've already covered those
topics in great detail in the two previous tutorials. Both centering and
opening up the clay correctly are undeniably important parts of this process
and if you attempt to pull the walls up on a pot that's centered poorly or
opened up incorrectly you'll only make this next step of pulling the walls up
all the more difficult. So let's begin.
6.1 With enough
dedicated practice, it doesn't take long to get pots to a point where they'd
look balanced and uniform.
6.2 The key is
just not to be too precious at the start and to throw cylinders until they
break so you really gain a thorough understanding of the limits of your
material.
6.3 While that
might have gone over the process in some detail, I'll spend the rest of this
tutorial going over each step in more detail.
6.4 I'll also
discuss how to fix certain things, why some errors arise, and show you many
more cross-sections like this to hopefully illustrate what is sometimes quite a
difficult process to grasp.
6.5 Let's
discuss the pressure needed to pull up the walls and the theory behind it.
6.6 If you only
apply pressure from the outside, you can see that the form just bows inward.
6.7 The same is
true if you only push from the inside.
6.8 Instead,
what we need is some counter pressure to oppose the force being applied from
one side.
6.9 I pinch with
two fingers, and they move up together with a relative amount of pressure.
Lecteur vidéo is loading.
Temps actuel 0:00
/
Durée -:-
Chargé: 0%
Type de flux EN DIRECT
Temps restant --:-
1x
2x
1.75x
1.5x
1.25x
1x, sélectionné
0.75x
0.5x
Chapitres
descriptions désactivées, sélectionné
Paramètres des sous-titres, ouvrir les paramètres des sous-titres
Sous-titres désactivés, sélectionné
This is a modal window.
Début de la fenêtre de dialogue. La touche d'échappement annulera et fermera la fenêtre.